您的位置：
詳情介紹
CA6150 普通臥式車床
CA6150 普通臥式車床是能對軸、盤、環等多種類型工件進行多種工序加工的臥式車床，常用于加工工件的內外回轉表面、端面和各種內外螺紋，采用相應的刀具和附件，還可進行鉆孔、擴孔、攻絲和滾花等。
產品介紹
| 型號 Model | CA6140 CA6140B | CA6240 CA6240B | CA6150 CA6150B | CA6250 CA6250B | |
| 床身上工件直徑 Max. Swing over bed | 400mm | 500mm | |||
| 刀架上工件直徑 Max. Swing over carriage | 210mm | 300mm | |||
| 馬鞍槽工件直徑 Max. Swing in gap | - | 630mm | - | 720mm | |
| 馬鞍槽有效長度 Effective gap length | - | 210mm | - | 210mm | |
| 工件長度 Max. Length of workpiece | 750mm or 1000mm or 1500mm or 2000mm or 3000mm | ||||
| 床身寬度 Width of bed | 400mm | ||||
| 刀桿截面 Section of turning tool | 25X25mm | ||||
| 主軸 Spindle | 主軸轉速范圍 Spindle speeds | 11—1600 r/min (24 steps) | |||
| 主軸內孔 Hole though spindle | 52mm(80mm) | ||||
| 主軸孔錐度 Spindle taper | Morse No.6 (莫氏6號) | ||||
| 進給 Feed | 進給數量 No. of feeds | 64種(kinds)(for each) | |||
| 公制螺紋Range of metric threads (kinds) | (1-192mm)44種(44kinds) | ||||
| 英制螺紋 Range of inch threads(kinds) | (1-24tpi)21種(21kinds) | ||||
| 模數螺紋 Rage of module threads(kinds) | 0.25-48(模數39種)(Module 39 kinds) | ||||
| 徑節螺紋 Rage of Diametral pitc threads (kinds) | 1-96DP(37種)(37 kinds) | ||||
| 床尾 Tailstock | 床尾主軸行程 Max tailstock spindle trel | 150mm | |||
| 床尾主軸直徑 Tailstock spindle diameter | 75mm | ||||
| 床尾主軸孔錐度 | Morse No.5 (莫氏5號) | ||||
| 主電機 Main motor | 7.5KW(10HP) | ||||
| 包裝外形尺寸 Picking dimensions (L×M×H mm) | Overall dimensions for 750 | 2440X1150X1170 | 2440X1150X1700 | ||
| Overall dimensions for 1000 | 2650X1150X1700 | 2650X1150X1700 | |||
| Overall dimensions for 1500 | 3150X1150X1700 | 3150X1150X1700 | |||
| Overall dimensions for 2000 | 3610X1150X1700 | 3610X1150X1700 | |||
| Overall dimensions for 3000 | 4610X1150X1700 | 4610X1150X1700 | |||
| 重量 Weight (Kg) | Length | 毛重 G.W. 凈重 N.W. | |||
| Overall dimensions for 750 | 2700 2000 | 2700 2000 | |||
| Overall dimensions for 1000 | 2800 2100 | 2700 2000 | |||
| Overall dimensions for 1500 | 3050 2250 | 2700 2000 | |||
| Overall dimensions for 2000 | 3300 2600 | 2700 2000 | |||
| Overall dimensions for 3000 | 4000 3450 | 2700 2000 | |||
普通車床是車床中應用泛的一種，約占車床類總數的65%，因其主軸以水平方式放置故稱為臥式車床.CA6150普通車床為通用機型，操作方便，布局緊湊，是理想的加工設備，主要針對一些盤類及軸類零部件加工，在選型的時候，軸類零部件應考慮刀架上最大回轉直徑，而加工盤類零部件則反之應考慮卡盤上最大回轉特別對于一些細長軸加工應考慮機床整體剛性及共震，安裝時應遠離震源，必要時配合中心架和跟刀架完成產品的加工。。
留言詢價
- 上一篇：CK6150 數控車床臥式
- 下一篇：ZX50C 鉆銑床
在線交流
咨詢電話