您的位置：
詳情介紹
CW6180重型臥式普通車床
產品參數
| 技術參數Specifications | CA6180B CA6180C | CA6280B CA6280C | |
| 床身工件直徑Max.Swing over bed | 800mm | ||
| 刀架上工件直徑Max.Swing over carriage | 540mm | ||
| 馬鞍槽工件直徑Max.Swing in gap | - | 1020mm | |
| 馬鞍槽有效長度Effective gap length | - | 210mm | |
| 工件長度Max.Length of work piece | 750/1000/1500/2000/2200/3000/4000mm | ||
| 床身寬度Width of bed | 400mm | ||
| 刀桿截面Section of turning tool | 25*25mm | ||
| 主軸 | 主軸轉速范圍Spindle speeds | 10-1400rpm/16-1400rpm (24級steps) | |
| Spindle | 主軸內孔Hole through spindle | 80mm 105mm | |
| 主軸孔錐度Spindle taper | Φ90 1:20 Φ113 1:20 | ||
| 進給 | 進給數量Number of feeds | 64種kinds (for each) | |
| Feed | 公制螺紋Range of metric threads(kinds) | (1-192mm)44種kinds | |
| 英制螺紋Range of inch threads(kinds) | (2-24 tpi)21種kinds | ||
| 模數螺紋Range of module threads(kinds) | 0.25-48(模數39種)(Moduie 39 kinds) | ||
| 徑節螺紋Range of pitch threads(kinds) | (1-96DP)37種kinds | ||
| 尾座 | 尾座主軸行程Max.Tail stock spindle travel | 150mm | |
| Tailstock | 尾座主軸直徑Tail stock spindle diameter | 75mm | |
| 尾座主軸孔錐度Taper of tail stock spindle center hole | 莫氏NO.5 (MT5) | ||
| 主電機Main motor | 7.5kW (10HP) | ||
| 包裝尺寸 | Overall dimensions for 750mm | 2550*1140*1750 | |
| Packing dimensions (L*W*H mm) | Overall dimensions for 1000mm | 2700*1140*1750 | |
| Overall dimensions for 1500mm | 3200*1140*1750 | ||
| Overall dimensions for 2000mm | 3700*1140*1750 | ||
| Overall dimensions for 2200mm | 4030*1140*1750 | ||
| Overall dimensions for 3000mm | 4850*1140*1750 | ||
| Overall dimensions for 4000mm | 5800*1140*1750 | ||
| 重量 | 長度Length | 毛重 凈重 | |
| Weight (kg) | G.W N.W. | ||
| Weight for 750mm | 2520 2400 | ||
| Weight for 1000mm | 2720 2560 | ||
| Weight for 1500mm | 2980 2800 | ||
| Weight for 2000mm | 3260 3087 | ||
| Weight for 2200mm | 3490 3287 | ||
| Weight for 3000mm | 4200 3887 | ||
| Weight for 4000mm | 4850 4500 | ||
1
.機床床頭箱與床身.尾座.托板等各結合面之間手工刮研，整機經過嚴格檢測，有效的保證機床的精度及穩定性。
2.機床采用高強度鑄鐵，添加了銅及鉻特殊材料，床身導軌寬度400mm，床身導軌淬火深度達到4mm，有效的提高了機床耐磨性及穩定性。
3.機床床頭箱潤滑采用擺線泵進行循環強制潤滑，針對南方炎熱天氣，保證了床頭箱的清潔度及散熱特點，有效的延長了軸承及齒輪的使用壽命。
4.機床主軸采用瓦房店軸承，主軸通孔φ52/80mm，機床齒輪采用精密磨削，有效提高了齒輪硬度，降低了機床噪音。
5.機床采用國內品牌絲杠，絲母采用優質青銅合金保證耐磨性和精度保持性。
6.機床采用四工位高強度刀架，刀柄尺寸：25x25mm。
CW6180重型臥式普通車床
留言詢價
- 上一篇：C6132臥式普通車床
- 下一篇：C6132臥式普通車床廠家
在線交流
咨詢電話